1/2" Shank

Basic Rotary Broach Tool Holder with 1″ Shank

Basic Rotary Broach Tool Holder. Designed for low volume and prototype broaching projects.

  • 1" Shank Diameter
  • Accepts 1/2" (.500") Diameter x 1-3/4" Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time

|Comments Off on Basic Rotary Broach Tool Holder with 1″ Shank

Basic Rotary Broach Tool Holder with 3/4″ Shank

Basic Rotary Broach Tool Holder. Designed for low volume and prototype broaching projects.

  • 3/4" Shank Diameter
  • Accepts 1/2" (.500") Diameter x 1-3/4" Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time

|Comments Off on Basic Rotary Broach Tool Holder with 3/4″ Shank

Basic Rotary Broach Tool Holder with 5/8″ Shank

Basic Rotary Broach Tool Holder. Designed for low volume and prototype broaching projects.

  • 5/8" Shank Diameter
  • Accepts 1/2" (.500") Diameter x 1-3/4" Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time

|Comments Off on Basic Rotary Broach Tool Holder with 5/8″ Shank

Micro Rotary Broach Tool Holder with 1/2″ Shank

World's Smallest Rotary Broach Tool Holder. Ideal for Swiss-Type CNC Lathes.

  • 1/2" Shank Diameter
  • Accepts 8mm (.315") Diameter x 28mm Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time
  • Pressure Relief Technology Allows Fluid and Air to Escape.
  • High Quality FAG Bearings for Greater Thrust Capacity

|Comments Off on Micro Rotary Broach Tool Holder with 1/2″ Shank

Micro Rotary Broach Tool Holder with 16mm Shank

World's Smallest Rotary Broach Tool Holder. Ideal for Swiss-Type CNC Lathes.

  • 16mm Shank Diameter
  • Accepts 8mm (.315") Diameter x 28mm Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time
  • Pressure Relief Technology Allows Fluid and Air to Escape.
  • High Quality FAG Bearings for Greater Thrust Capacity

|Comments Off on Micro Rotary Broach Tool Holder with 16mm Shank

Micro Rotary Broach Tool Holder with 20mm Shank

World's Smallest Rotary Broach Tool Holder. Ideal for Swiss-Type CNC Lathes.

  • 20mm Shank Diameter
  • Accepts 8mm (.315") Diameter x 28mm Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time
  • Pressure Relief Technology Allows Fluid and Air to Escape.
  • High Quality FAG Bearings for Greater Thrust Capacity

|Comments Off on Micro Rotary Broach Tool Holder with 20mm Shank

Micro Rotary Broach Tool Holder with 22mm Shank

World's Smallest Rotary Broach Tool Holder. Ideal for Swiss-Type CNC Lathes.

  • 22mm Shank Diameter
  • Accepts 8mm (.315") Diameter x 28mm Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time
  • Pressure Relief Technology Allows Fluid and Air to Escape.
  • High Quality FAG Bearings for Greater Thrust Capacity

|Comments Off on Micro Rotary Broach Tool Holder with 22mm Shank

Micro Rotary Broach Tool Holder with 3/4″ Shank

World's Smallest Rotary Broach Tool Holder. Ideal for Swiss-Type CNC Lathes.

  • 3/4" Shank Diameter
  • Accepts 8mm (.315") Diameter x 28mm Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time
  • Pressure Relief Technology Allows Fluid and Air to Escape.
  • High Quality FAG Bearings for Greater Thrust Capacity

|Comments Off on Micro Rotary Broach Tool Holder with 3/4″ Shank

Micro Rotary Broach Tool Holder with 5/8″ Shank

World's Smallest Rotary Broach Tool Holder. Ideal for Swiss-Type CNC Lathes.

  • 5/8" Shank Diameter
  • Accepts 8mm (.315") Diameter x 28mm Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time
  • Pressure Relief Technology Allows Fluid and Air to Escape.
  • High Quality FAG Bearings for Greater Thrust Capacity

|Comments Off on Micro Rotary Broach Tool Holder with 5/8″ Shank

Static Rotary Broach Tool Holder with 1″ Shank

Static Rotary Broach Tool Holder The Static Rotary Broach Holder is designed to hold rotary broach tools in a stationary position. The ‘ST’ series broach holders are suitable for standard and custom length broaches. To use the holder, simply mount the holder in the machine, and tighten the set screw onto the desired rotary broach.

  • 1" Shank Diameter
  • Accepts 1/2" (.500") Diameter x 1-3/4" Rotary Broaches
  • Can be mounted into a punch press or milling machine for accurate, light duty pecking or punching operations
  • Adjustment Free Design Minimizes Set-Up Time
  • Through Coolant
  • Quick Change Technology. Change out broaches with extremely accurate repeatability.

|Comments Off on Static Rotary Broach Tool Holder with 1″ Shank

Static Rotary Broach Tool Holder with 20mm Shank for 8mm Broaches

Static Rotary Broach Tool Holder The Static Rotary Broach Holder is designed to hold rotary broach tools in a stationary position. The ‘ST’ series broach holders are suitable for standard and custom length broaches. To use the holder, simply mount the holder in the machine, and tighten the set screw onto the desired rotary broach.

  • 20mm Shank Diameter
  • Accepts 8mm (.315") Diameter x 1-1/4" Rotary Broaches
  • Can be mounted into a punch press or milling machine for accurate, light duty pecking or punching operations
  • Adjustment Free Design Minimizes Set-Up Time
  • Through Coolant
  • Quick Change Technology. Change out broaches with extremely accurate repeatability.

|Comments Off on Static Rotary Broach Tool Holder with 20mm Shank for 8mm Broaches

Static Rotary Broach Tool Holder with 3/4″ Shank

Static Rotary Broach Tool Holder The Static Rotary Broach Holder is designed to hold rotary broach tools in a stationary position. The ‘ST’ series broach holders are suitable for standard and custom length broaches. To use the holder, simply mount the holder in the machine, and tighten the set screw onto the desired rotary broach.

  • 3/4" Shank Diameter
  • Accepts 1/2" (.500") Diameter x 1-3/4" Rotary Broaches
  • Can be mounted into a punch press or milling machine for accurate, light duty pecking or punching operations
  • Adjustment Free Design Minimizes Set-Up Time
  • Through Coolant
  • Quick Change Technology. Change out broaches with extremely accurate repeatability.

|Comments Off on Static Rotary Broach Tool Holder with 3/4″ Shank