1/2" Shank

Static Rotary Broach Tool Holder with 3/4″ Shank for 8mm Broaches

Static Rotary Broach Tool Holder The Static Rotary Broach Holder is designed to hold rotary broach tools in a stationary position. The ‘ST’ series broach holders are suitable for standard and custom length broaches. To use the holder, simply mount the holder in the machine, and tighten the set screw onto the desired rotary broach.

  • 3/4" Shank Diameter
  • Accepts 8mm (.315") Diameter x 1-1/4" Rotary Broaches
  • Can be mounted into a punch press or milling machine for accurate, light duty pecking or punching operations
  • Adjustment Free Design Minimizes Set-Up Time
  • Through Coolant
  • Quick Change Technology. Change out broaches with extremely accurate repeatability.

|Comments Off on Static Rotary Broach Tool Holder with 3/4″ Shank for 8mm Broaches

Static Rotary Broach Tool Holder with 5/8″ Shank

Static Rotary Broach Tool Holder The Static Rotary Broach Holder is designed to hold rotary broach tools in a stationary position. The ‘ST’ series broach holders are suitable for standard and custom length broaches. To use the holder, simply mount the holder in the machine, and tighten the set screw onto the desired rotary broach.

  • 5/8" Shank Diameter
  • Accepts 1/2" (.500") Diameter x 1-3/4" Rotary Broaches
  • Can be mounted into a punch press or milling machine for accurate, light duty pecking or punching operations
  • Adjustment Free Design Minimizes Set-Up Time
  • Through Coolant
  • Quick Change Technology. Change out broaches with extremely accurate repeatability.

|Comments Off on Static Rotary Broach Tool Holder with 5/8″ Shank

Static Rotary Broach Tool Holder with 5/8″ Shank for 8mm Broaches

Static Rotary Broach Tool Holder The Static Rotary Broach Holder is designed to hold rotary broach tools in a stationary position. The ‘ST’ series broach holders are suitable for standard and custom length broaches. To use the holder, simply mount the holder in the machine, and tighten the set screw onto the desired rotary broach.

  • 5/8" Shank Diameter
  • Accepts 8mm (.315") Diameter x 1-1/4" Rotary Broaches
  • Can be mounted into a punch press or milling machine for accurate, light duty pecking or punching operations
  • Adjustment Free Design Minimizes Set-Up Time
  • Through Coolant
  • Quick Change Technology. Change out broaches with extremely accurate repeatability.

|Comments Off on Static Rotary Broach Tool Holder with 5/8″ Shank for 8mm Broaches