20mm Shank

25mm Shank Tool Holder for 1/2″ Shank Rotary Broaches

25mm Shank Rotary Broach Tool Holder Features:

  • 25mm Shank Diameter
  • Accepts 1/2" (.500") Diameter x 1.75" Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time
  • Pressure Relief Technology Allows Fluid and Air to Escape.
  • High Quality FAG Bearings for Greater Thrust Capacity

|Comments Off on 25mm Shank Tool Holder for 1/2″ Shank Rotary Broaches

25mm Shank Tool Holder for 8mm Shank Rotary Broaches

25mm Shank Rotary Broach Tool Holder Features:

  • 25mm Shank Diameter
  • Accepts 8mm (.315") Diameter x 1.25" Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time
  • Pressure Relief Technology Allows Fluid and Air to Escape.
  • High Quality FAG Bearings for Greater Thrust Capacity

|Comments Off on 25mm Shank Tool Holder for 8mm Shank Rotary Broaches

3/4″ Shank Tool Holder for 1/2″ Shank Rotary Broaches

3/4" Shank Rotary Broach Tool Holder Features:

  • 3/4" Shank Diameter
  • Accepts 1/2" (.500") Diameter x 1.75" Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time
  • Pressure Relief Technology Allows Fluid and Air to Escape.
  • High Quality FAG Bearings for Greater Thrust Capacity

|Comments Off on 3/4″ Shank Tool Holder for 1/2″ Shank Rotary Broaches

3/4″ Shank Tool Holder for 8mm Shank Rotary Broaches

3/4" Shank Rotary Broach Tool Holder Features:

  • 3/4" Shank Diameter
  • Accepts 8mm (.315") Diameter x 1.25" Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time
  • Pressure Relief Technology Allows Fluid and Air to Escape.
  • High Quality FAG Bearings for Greater Thrust Capacity

|Comments Off on 3/4″ Shank Tool Holder for 8mm Shank Rotary Broaches

32mm Shank Tool Holder for 1/2″ Shank Rotary Broaches

32mm Shank Rotary Broach Tool Holder Features:

  • 32mm Shank Diameter
  • Accepts 1/2" (.500") Diameter x 1.75" Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time
  • Pressure Relief Technology Allows Fluid and Air to Escape.
  • High Quality FAG Bearings for Greater Thrust Capacity

|Comments Off on 32mm Shank Tool Holder for 1/2″ Shank Rotary Broaches

32mm Shank Tool Holder for 8mm Shank Rotary Broaches

32mm Shank Rotary Broach Tool Holder Features:

  • 32mm Shank Diameter
  • Accepts 8mm (.315") Diameter x 1.25" Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time
  • Pressure Relief Technology Allows Fluid and Air to Escape.
  • High Quality FAG Bearings for Greater Thrust Capacity

|Comments Off on 32mm Shank Tool Holder for 8mm Shank Rotary Broaches

5/8″ Shank Tool Holder for 1/2″ Shank Rotary Broaches

5/8" Shank Rotary Broach Tool Holder Features:

  • 5/8" Shank Diameter
  • Accepts 1/2" (.500") Diameter x 1.75" Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time
  • Pressure Relief Technology Allows Fluid and Air to Escape.
  • High Quality FAG Bearings for Greater Thrust Capacity

|Comments Off on 5/8″ Shank Tool Holder for 1/2″ Shank Rotary Broaches

5/8″ Shank Tool Holder for 8mm Shank Rotary Broaches

5/8" Shank Rotary Broach Tool Holder Features:

  • 5/8" Shank Diameter
  • Accepts 8mm (.315") Diameter x 1.25" Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time
  • Pressure Relief Technology Allows Fluid and Air to Escape.
  • High Quality FAG Bearings for Greater Thrust Capacity

|Comments Off on 5/8″ Shank Tool Holder for 8mm Shank Rotary Broaches

Basic Rotary Broach Tool Holder with 1″ Shank

Basic Rotary Broach Tool Holder. Designed for low volume and prototype broaching projects.

  • 1" Shank Diameter
  • Accepts 1/2" (.500") Diameter x 1-3/4" Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time

|Comments Off on Basic Rotary Broach Tool Holder with 1″ Shank

Basic Rotary Broach Tool Holder with 3/4″ Shank

Basic Rotary Broach Tool Holder. Designed for low volume and prototype broaching projects.

  • 3/4" Shank Diameter
  • Accepts 1/2" (.500") Diameter x 1-3/4" Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time

|Comments Off on Basic Rotary Broach Tool Holder with 3/4″ Shank

Basic Rotary Broach Tool Holder with 5/8″ Shank

Basic Rotary Broach Tool Holder. Designed for low volume and prototype broaching projects.

  • 5/8" Shank Diameter
  • Accepts 1/2" (.500") Diameter x 1-3/4" Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time

|Comments Off on Basic Rotary Broach Tool Holder with 5/8″ Shank

External Rotary Broach Tool Holder with 1″ Shank

1" Shank External Rotary Broach Tool Holder Features:

  • 1" Shank Diameter
  • Accepts 3/4" (.750") Diameter x 1.1" Length External Rotary Broaches
  • Sealed Bearings Require No Routine Maintenance
  • Adjustment Free Design Minimizes Set-Up Time
  • High Quality FAG Bearings for Greater Thrust Capacity

|Comments Off on External Rotary Broach Tool Holder with 1″ Shank